WEBVTT

1
00:00:02.050 --> 00:00:10.050
Start in My Labs and open Import to bring in a Packet Tracer exercise.

2
00:00:10.100 --> 00:00:17.100
Choose Packet Tracer and select a supported project file from your computer.

3
00:00:20.500 --> 00:00:26.500
Give the imported exercise a clear name before you continue.

4
00:00:26.650 --> 00:00:33.150
The imported lab appears as a separate entry in My Labs.

5
00:00:33.300 --> 00:00:40.800
Open the lab and check that both routers and their cable are present.

6
00:00:42.100 --> 00:00:49.100
Use Configs to review the settings that were imported for each device.

7
00:00:51.250 --> 00:00:57.750
The startup view shows the saved addresses for this two-router example.

8
00:01:01.600 --> 00:01:08.100
Open the first router terminal to check the imported interface settings.

9
00:01:10.100 --> 00:01:18.100
The interface summary confirms that the address is present and the link is up.

10
00:01:18.200 --> 00:01:24.700
Ping the second router to test connectivity across the imported cable.

11
00:01:26.650 --> 00:01:32.650
Successful replies confirm that this example is ready for practice.

12
00:01:32.800 --> 00:01:41.300
Keep the original file and check imported devices and settings before using a larger exercise.

13
00:01:41.400 --> 00:01:49.400
Packet Tracer activities can import their initial network, but their assessment is not transferred.

14
00:01:51.500 --> 00:01:57.500
Packet Tracer export is currently unavailable in the lab menu.