0:02 Start in My Labs and open Import to bring in a Packet Tracer exercise.

0:10 Choose Packet Tracer and select a supported project file from your computer.

0:20 Give the imported exercise a clear name before you continue.

0:26 The imported lab appears as a separate entry in My Labs.

0:33 Open the lab and check that both routers and their cable are present.

0:42 Use Configs to review the settings that were imported for each device.

0:51 The startup view shows the saved addresses for this two-router example.

1:01 Open the first router terminal to check the imported interface settings.

1:10 The interface summary confirms that the address is present and the link is up.

1:18 Ping the second router to test connectivity across the imported cable.

1:26 Successful replies confirm that this example is ready for practice.

1:32 Keep the original file and check imported devices and settings before using a larger exercise.

1:41 Packet Tracer activities can import their initial network, but their assessment is not transferred.

1:51 Packet Tracer export is currently unavailable in the lab menu.