WEBVTT

1
00:00:10.050 --> 00:00:17.550
Select the Linux PC, open Desktop Network Settings and choose the connected interface.

2
00:00:20.750 --> 00:00:29.450
Set a static IPv4 address, prefix length, gateway and DNS server for this prepared lab.

3
00:00:40.450 --> 00:00:48.950
In the terminal, verify the address and route, then ping a destination beyond the gateway.

4
00:00:50.100 --> 00:00:57.100
Use the lookup command to resolve a hostname served by this lab.

5
00:01:13.300 --> 00:01:19.450
Switch IPv4 to Automatic DHCP and apply the change.

6
00:01:28.550 --> 00:01:34.700
Inspect the address, DNS, and route that DHCP learned.

7
00:01:54.500 --> 00:02:04.000
Power off the DHCP server and retry to see a missing-offer error while the existing address remains.

8
00:02:23.400 --> 00:02:29.400
Power the DHCP server back on and retry the request.

9
00:02:32.650 --> 00:02:39.150
Configure a static IPv6 address, prefix, and gateway for this lab.

10
00:02:49.450 --> 00:02:55.050
Verify the IPv6 route and ping the IPv6 gateway.

11
00:03:10.800 --> 00:03:18.300
Request an automatic IPv6 address and inspect the address that was actually received.

12
00:03:28.700 --> 00:03:35.200
Verify both stacks and confirm the second interface was left untouched.

13
00:03:51.400 --> 00:03:58.250
Enter malformed DNS, see it rejected, and recover with valid settings.

14
00:03:58.450 --> 00:04:05.450
Save the settings, reopen them, and verify the choices that were saved.
