WEBVTT

1
00:00:00.100 --> 00:00:07.150
Connect both Cisco firewalls through their dedicated failover interfaces.

2
00:00:19.650 --> 00:00:25.150
Verify that failover is off before configuring either unit.

3
00:00:39.800 --> 00:00:46.800
Configure the first firewall as primary and set the failover link addresses.

4
00:01:01.200 --> 00:01:08.200
Configure the other firewall as secondary with the same failover link settings.

5
00:01:16.350 --> 00:01:22.850
The primary reports Active and sees the secondary as Standby Ready.

6
00:01:29.950 --> 00:01:37.950
Check the secondary to confirm it sees the same pair from the other side.

7
00:01:48.800 --> 00:01:57.300
Shut the secondary failover interface and verify that the standby disappears from the primary’s output.

8
00:02:13.250 --> 00:02:21.250
Bring the interface back up and confirm that the secondary returns to Standby Ready.