WEBVTT

1
00:00:00.100 --> 00:00:06.100
Two clients sit on different networks from their address servers.

2
00:00:15.750 --> 00:00:22.650
Configure the IPv4 pool and exclude the gateway and reserved addresses.

3
00:00:29.500 --> 00:00:35.500
The client gets no offer before the relay is configured.

4
00:00:45.950 --> 00:00:52.450
Add the helper address on the interface facing the IPv4 client.

5
00:01:00.450 --> 00:01:06.950
Request a lease, then check the assigned address and default route.

6
00:01:20.750 --> 00:01:28.750
Check the binding on the server and verify that the client reaches its gateway.

7
00:01:30.600 --> 00:01:36.200
Release the IPv4 lease, then request a new one.

8
00:01:46.400 --> 00:01:51.650
Configure the IPv6 pool on the other router.

9
00:01:58.300 --> 00:02:04.300
The IPv6 client needs a relay to reach that pool.

10
00:02:20.500 --> 00:02:26.500
Add the IPv6 relay destination and request a lease again.

11
00:02:34.550 --> 00:02:41.550
Verify that the server has a binding for the leased IPv6 address.

12
00:02:48.450 --> 00:02:55.450
Check the address on the client and ping its local IPv6 gateway.