WEBVTT

1
00:00:00.100 --> 00:00:08.100
Connect two Cisco switches with two links, with a test host on each side.

2
00:00:23.350 --> 00:00:31.350
Set switch two to passive mode so it waits for an active LACP peer.

3
00:00:46.600 --> 00:00:54.600
Set both uplinks on switch one to active mode in the same channel group.

4
00:00:56.550 --> 00:01:04.050
The summary shows port channel ten in use, with both physical ports bundled.

5
00:01:05.800 --> 00:01:12.800
Reload the lab to see both links labeled as one port channel.

6
00:01:18.600 --> 00:01:24.600
Ping across the bundle to confirm the starting path works.

7
00:01:34.750 --> 00:01:40.750
Shut down one member interface to simulate a failed link.

8
00:01:43.000 --> 00:01:50.000
Port channel ten stays in use with the other member still bundled.

9
00:01:57.350 --> 00:02:02.850
Ping again to confirm the surviving link carries traffic.

10
00:02:14.500 --> 00:02:22.000
Bring the disabled interface back up and confirm both members are bundled again.