WEBVTT

1
00:00:00.100 --> 00:00:08.100
This prepared Cisco IOS XR lab connects the device to a Linux practice PC.

2
00:00:10.100 --> 00:00:17.100
Open the selected device’s Web UI and confirm its name before editing.

3
00:00:22.100 --> 00:00:29.100
In Interfaces, update the routed port description while preserving the other port.

4
00:00:44.300 --> 00:00:53.300
Check the description in the terminal and verify that the practice PC still reaches the device.

5
00:01:06.450 --> 00:01:14.200
Open Routing and add the destination network, subnet mask, and reachable next hop.

6
00:01:16.300 --> 00:01:23.800
Apply the route and confirm the destination and next hop in the browser.

7
00:01:42.200 --> 00:01:50.200
Verify the installed route in the live routing table and its committed running configuration.

8
00:01:58.400 --> 00:02:05.400
Reopen the lab and confirm the same interface description and static route.

9
00:02:08.250 --> 00:02:14.250
Delete only the route that you added in the browser.

10
00:02:32.850 --> 00:02:39.850
Check that the route is withdrawn and the independent control route remains.

11
00:02:46.900 --> 00:02:53.900
Return to Routing to review the remaining entry on the selected device.

12
00:02:54.000 --> 00:03:01.500
Use the management pages and terminal together to verify your own configuration changes.