WEBVTT

1
00:00:01.400 --> 00:00:09.400
Select the HP ProCurve switch and open its Web UI from the device toolbar.

2
00:00:11.950 --> 00:00:17.450
Check the switch name and model on the dashboard.

3
00:00:19.100 --> 00:00:26.600
Open Interfaces to see which port is connected and which port is down.

4
00:00:38.150 --> 00:00:45.650
Use the switch terminal to create a training VLAN and assign port one.

5
00:00:48.100 --> 00:00:55.100
Save the configuration and use the terminal to confirm the new VLAN.

6
00:01:07.200 --> 00:01:15.700
Open VLANs in the Web UI to inspect the training VLAN and its port count.

7
00:01:17.050 --> 00:01:23.550
Open Routing to check the routing status and static route inventory.

8
00:01:28.750 --> 00:01:35.750
Reopen the lab and confirm that the training VLAN is still listed.