WEBVTT

1
00:00:00.050 --> 00:00:08.050
This prepared lab contains a Cisco Nexus vPC pair and an Arista MLAG pair.

2
00:00:12.100 --> 00:00:19.100
Select the Nexus switch and open vPC in its device Web UI.

3
00:00:21.000 --> 00:00:28.000
Check the domain, peer status, keepalive, peer link and member port-channel.

4
00:00:31.900 --> 00:00:39.400
Compare the same domain and member status with show vpc in the terminal.

5
00:00:46.400 --> 00:00:51.950
Select the Arista switch and inspect its prepared VLANs.

6
00:00:53.650 --> 00:01:01.200
Open MLAG to review the domain, peer address, peer link and negotiated state.

7
00:01:05.650 --> 00:01:11.650
Compare the MLAG domain and interfaces with the Arista terminal.

8
00:01:12.250 --> 00:01:19.750
These pages report device status; configure each platform with its own supported commands.

9
00:01:39.400 --> 00:01:47.850
Disable the prepared Arista peer link, then refresh MLAG to inspect the inactive state.

10
00:02:07.850 --> 00:02:15.850
Restore the peer link and confirm that the active state returns in both views.

11
00:02:41.300 --> 00:02:48.300
Reopen the saved lab and confirm the selected device and its status.

12
00:03:02.650 --> 00:03:10.150
An unconfigured switch shows a clear empty state instead of invented peer status.