WEBVTT

1
00:00:00.100 --> 00:00:08.100
In this lab, two source routers reach the same destination through an access switch.

2
00:00:30.500 --> 00:00:40.000
Verify both paths and identify the hardware address of the source on the port we will protect.

3
00:00:52.750 --> 00:01:00.250
Enable port security and allow one deliberately different address on the protected port.

4
00:01:15.050 --> 00:01:23.550
The protected source can no longer reach the destination, while the other source still can.

5
00:01:31.250 --> 00:01:37.250
Restrict mode reports the violation and keeps the port up.

6
00:02:03.400 --> 00:02:11.400
Replace the configured address with the actual source address and check both paths again.