WEBVTT

1
00:00:02.000 --> 00:00:11.000
Open Server Builder in a practice lab with a Cisco router and a connected Linux server.

2
00:00:15.900 --> 00:00:24.900
Add the syslog receiver preset to create separate UDP and TCP inputs on port five fourteen.

3
00:00:26.900 --> 00:00:34.900
Choose Apply to server and select the Linux server that will collect the logs.

4
00:00:41.750 --> 00:00:47.250
On the server, check that both listeners are running.

5
00:00:54.350 --> 00:01:01.350
On the router, point the TCP logging destination at the receiver address.

6
00:01:08.900 --> 00:01:16.400
Change an interface state and check the server log for the router event.

7
00:01:28.200 --> 00:01:37.200
Stop the receiver and confirm that a new router event does not appear in the log.

8
00:01:50.150 --> 00:01:57.150
Start the receiver again and verify that the next interface event arrives.

9
00:02:04.600 --> 00:02:12.100
Import the server configuration and reopen the saved design to check both inputs.