WEBVTT

1
00:00:00.100 --> 00:00:07.600
This prepared Arista EOS lab connects the device to a Linux practice PC.

2
00:00:09.550 --> 00:00:16.550
Open the selected device’s Web UI and confirm its name before editing.

3
00:00:21.750 --> 00:00:28.750
Update the routed port description in Interfaces while preserving the other port.

4
00:00:44.000 --> 00:00:53.000
Check the description in the terminal and verify that the practice PC still reaches the device.

5
00:01:06.350 --> 00:01:14.850
Open Routing and enter the destination network with its subnet mask and reachable next hop.

6
00:01:17.450 --> 00:01:24.950
Apply the route and confirm the destination and next hop in the browser.

7
00:01:50.800 --> 00:01:58.300
Verify the installed route in the live routing table and save the configuration.

8
00:02:06.650 --> 00:02:13.650
Reopen the lab and confirm the same interface description and static route.

9
00:02:16.600 --> 00:02:22.600
Delete only the route that you added in the browser.

10
00:02:48.050 --> 00:02:56.050
Verify that this route is withdrawn and save without changing the independent control route.

11
00:03:02.900 --> 00:03:09.900
Return to Routing to review the remaining entry on the selected device.

12
00:03:10.050 --> 00:03:17.550
Use the management pages and terminal together to verify your own configuration changes.