WEBVTT

1
00:00:01.500 --> 00:00:10.000
Select your Cisco IOS XE router and open its Web UI from the device toolbar.

2
00:00:11.900 --> 00:00:17.400
Check the device name before you edit its configuration.

3
00:00:27.250 --> 00:00:34.250
In Interfaces, select the port and apply the address, mask, and description.

4
00:00:46.900 --> 00:00:54.400
Use the router terminal to verify the interface settings and save the configuration.

5
00:00:56.400 --> 00:01:04.400
For a Linux PC, use the terminal to verify the connection to the router.

6
00:01:17.450 --> 00:01:25.950
In Routing, add a static route with the destination network, mask, and reachable next hop.

7
00:01:36.100 --> 00:01:43.100
Check the live routing table in the terminal, then save the route.

8
00:01:56.600 --> 00:02:05.100
Reopen the lab and confirm that the route is still listed on the same router.

9
00:02:14.750 --> 00:02:24.250
Delete the route in the Web UI and check that it is withdrawn from the live table.

10
00:02:30.550 --> 00:02:36.200
Open VLANs to inspect the router’s current VLAN inventory.