Use the Cisco IOS XE Web UI

Select your Cisco IOS XE router and open its Web UI from the device toolbar.

Check the device name before you edit its configuration.

In Interfaces, select the port and apply the address, mask, and description.

Use the router terminal to verify the interface settings and save the configuration.

For a Linux PC, use the terminal to verify the connection to the router.

In Routing, add a static route with the destination network, mask, and reachable next hop.

Check the live routing table in the terminal, then save the route.

Reopen the lab and confirm that the route is still listed on the same router.

Delete the route in the Web UI and check that it is withdrawn from the live table.

Open VLANs to inspect the router’s current VLAN inventory.