WEBVTT

1
00:00:01.450 --> 00:00:09.450
Select your Cisco NX-OS switch and open its Web UI from the device toolbar.

2
00:00:11.450 --> 00:00:16.950
Check the switch name before you edit its configuration.

3
00:00:23.550 --> 00:00:29.550
In Interfaces, choose the routed port and apply a description.

4
00:00:41.000 --> 00:00:49.000
Verify the port in the switch terminal and copy the running configuration to startup.

5
00:00:50.950 --> 00:00:58.450
Use the connected Linux PC to verify that it can reach the switch.

6
00:01:12.250 --> 00:01:19.000
In Routing, enter the destination network, mask, and reachable next hop.

7
00:01:29.800 --> 00:01:37.800
Check the new static route in the live routing table, then save the configuration.

8
00:01:52.000 --> 00:02:00.500
Reopen the lab and confirm that the route is still listed on the same switch.

9
00:02:10.750 --> 00:02:19.750
Delete the route in the Web UI and verify that it leaves the live routing table.

10
00:02:26.450 --> 00:02:32.950
Open VLANs to check the training VLAN in the switch inventory.