WEBVTT

1
00:00:03.300 --> 00:00:10.400
Select the MikroTik RouterOS device and open WebFig from the device toolbar.

2
00:00:12.400 --> 00:00:19.400
Open Interfaces to identify the Ethernet port connected to your practice PC.

3
00:00:25.800 --> 00:00:33.300
In Addresses, select Add New and enter the port, address, and network mask.

4
00:00:36.100 --> 00:00:44.100
Apply the change and confirm that the new address appears on the selected port.

5
00:00:51.300 --> 00:00:57.300
Use the RouterOS terminal to verify the address and prefix.

6
00:01:02.700 --> 00:01:10.200
Ping the router from the connected PC to check that the address responds.

7
00:01:16.750 --> 00:01:25.250
Reopen the lab and confirm that the address is still listed on the same port.