WEBVTT

1
00:00:00.100 --> 00:00:10.600
Use an ASAv firewall to inspect a live SSH client connection between a Linux server and a Cisco router.

2
00:00:14.850 --> 00:00:25.350
The client and router already have addresses, routes and SSH access configured. First, confirm that the router is reachable.

3
00:00:29.850 --> 00:00:41.350
On the firewall, the connection count starts at zero. A reachability check by itself does not leave an open SSH connection.

4
00:00:41.950 --> 00:00:53.450
This access list permits SSH to the router and denies a second service port. It also permits the separate ping check.

5
00:00:59.900 --> 00:01:06.900
Open Python on the Linux server and import the supported Netmiko client.

6
00:01:10.000 --> 00:01:21.500
Connect to the router with its lab credentials, then request its interface summary. The response confirms that the remote session works.

7
00:01:27.300 --> 00:01:37.300
On the firewall, show conn displays the source and destination addresses, their ports and the actual interface names.

8
00:01:37.800 --> 00:01:49.100
The connection count is now one. Idle time uses the lab clock. This walkthrough does not demonstrate application byte accounting.

9
00:01:49.500 --> 00:01:58.400
An ordinary connection does not create a NAT translation. This lab has no NAT rule.

10
00:02:06.200 --> 00:02:17.200
From the client, try the denied service port. The access list rejects the attempt before it creates a successful connection.

11
00:02:33.150 --> 00:02:44.150
The permitted connection remains open and can still run a command. The rejected attempt does not add a successful connection.

12
00:02:55.450 --> 00:03:06.450
Disconnect the first client and check the firewall again. The active count returns to zero while the peak remains visible.

13
00:03:29.050 --> 00:03:41.950
After reconnecting, leaving the Python interpreter also closes its connection. Use these checks to follow the supported SSH connection from admission to cleanup.
