WEBVTT

1
00:00:00.100 --> 00:00:07.100
This prepared Dell lab connects the switch to a Linux practice PC.

2
00:00:09.200 --> 00:00:16.200
Open the selected device’s Web UI and confirm its name before editing.

3
00:00:21.300 --> 00:00:28.300
Update the routed port description in Interfaces while preserving the other port.

4
00:00:44.450 --> 00:00:53.450
Check the description in the terminal and verify that the practice PC still reaches the device.

5
00:01:06.400 --> 00:01:14.900
Open Routing and enter the destination network with its subnet mask and reachable next hop.

6
00:01:17.550 --> 00:01:25.050
Apply the route and confirm the destination and next hop in the browser.

7
00:01:51.150 --> 00:01:58.650
Verify the installed route in the live routing table and save the configuration.

8
00:02:07.000 --> 00:02:14.000
Reopen the lab and confirm the same interface description and static route.

9
00:02:16.850 --> 00:02:22.850
Delete only the route that you added in the browser.

10
00:02:48.650 --> 00:02:56.650
Verify that this route is withdrawn and save without changing the independent control route.

11
00:03:03.250 --> 00:03:10.250
Return to Routing to review the remaining entry on the selected device.

12
00:03:10.350 --> 00:03:17.850
Use the management pages and terminal together to verify your own configuration changes.