nuLAB.ai
Start free trial

Networking · Episode 55 · 2:10

Build a PAN-OS security policy in the web UI

Create a PAN-OS security rule for two lab addresses, commit it in the device Web UI, and verify reachability with a separate control path. Reopen the lab and check the running policy.

English narration and on-screen explanations. Read the narration transcript.

Chapters and transcript times will be ready shortly. You can use the video’s Play control or open the MP4 below.

Chapters
Open MP4 · Download transcript · English captions

Narration transcript

The English narration in this video. Select a time to watch that moment.

  1. Open the PAN-OS device Web UI and select Policies to review the committed security rules.

  2. The target is blocked, while a separate control path is allowed.

  3. Add an allow rule for the client address and target address in the selected zones.

  4. Pending Changes means the target still follows the running policy.

  5. Select Commit and wait for the policy status to show Committed.

  6. Repeat both probes to confirm the target is reachable and the control path still works.

  7. Reopen the lab and confirm that the same rule is still committed.

  8. Check the running security policy in the firewall terminal.

Back to all Networking videos