Networking · Episode 47 · 1:25

Assign a RouterOS address in WebFig

Name: Assign a RouterOS address in WebFig
Uploaded: 2026-11-07
Duration: PT85.35S
Description: Assign an IPv4 address to a MikroTik RouterOS port in WebFig. Confirm the address in the router terminal, test connectivity from a PC, and check it after reopening the lab.

Assign an IPv4 address to a MikroTik RouterOS port in WebFig. Confirm the address in the router terminal, test connectivity from a PC, and check it after reopening the lab.

English narration and on-screen explanations. Read the narration transcript.

Chapters and transcript times will be ready shortly. You can use the video’s Play control or open the MP4 below.

Chapters

Open MP4 · Download transcript · English captions

Narration transcript

The English narration in this video. Select a time to watch that moment.

Select the MikroTik RouterOS device and open WebFig from the device toolbar.
Open Interfaces to identify the Ethernet port connected to your practice PC.
In Addresses, select Add New and enter the port, address, and network mask.
Apply the change and confirm that the new address appears on the selected port.
Use the RouterOS terminal to verify the address and prefix.
Ping the router from the connected PC to check that the address responds.
Reopen the lab and confirm that the address is still listed on the same port.

Back to all Networking videos