Networking · Episode 04 · 1:46
Explore an SRv6 VPN
Inspect an SRv6 VPN lab, then verify IPv4 connectivity between two sites.
English narration and on-screen explanations. Read the narration transcript.
Chapters
Narration transcript
The English narration in this video. Select a time to watch that moment.
Start with the prepared SRv6 VPN lab and locate the two customer sites.
The IOS XE and IOS XR edge routers connect the sites across an IPv6 core.
Open the edge router terminal and check its SRv6 locator.
Inspect the local SIDs, then check the VPN routes for the remote site.
Use the SRv6 filter to show or hide the L3VPN overlay.
Hover over an edge router to inspect its locator and SID summary.
Hover over the SRv6 link to inspect the VPN service in both directions.
From the first customer router, ping the remote site to check connectivity.
Repeat the ping from the other site to check the return path.
Use these terminal checks and the topology overlay together as you explore SRv6.
