Narration transcript
The English narration in this video. Select a time to watch that moment.
Use an ASAv firewall to inspect a live SSH client connection between a Linux server and a Cisco router.
The client and router already have addresses, routes and SSH access configured. First, confirm that the router is reachable.
On the firewall, the connection count starts at zero. A reachability check by itself does not leave an open SSH connection.
This access list permits SSH to the router and denies a second service port. It also permits the separate ping check.
Open Python on the Linux server and import the supported Netmiko client.
Connect to the router with its lab credentials, then request its interface summary. The response confirms that the remote session works.
On the firewall, show conn displays the source and destination addresses, their ports and the actual interface names.
The connection count is now one. Idle time uses the lab clock. This walkthrough does not demonstrate application byte accounting.
An ordinary connection does not create a NAT translation. This lab has no NAT rule.
From the client, try the denied service port. The access list rejects the attempt before it creates a successful connection.
The permitted connection remains open and can still run a command. The rejected attempt does not add a successful connection.
Disconnect the first client and check the firewall again. The active count returns to zero while the peak remains visible.
After reconnecting, leaving the Python interpreter also closes its connection. Use these checks to follow the supported SSH connection from admission to cleanup.
